Home › Multilingual Archive Index › R-2 (missile)

R-2 (missile)

The R-2 rocket (NATO reporting name SS-2 Sibling) was developed based on R-1 design. This was an improved version of German V-2 rocket manufactured by the Soviet Union.

The R-1 was quickly followed by an evolutionary improvement, the R-2 (SS-2), which had a longer range and at least four major differences in design. The weight was increased by 50%, but the range was more than doubled, to 600 km (370 miles). R-2 had the following major differences from the R-1's (and hence from the V-2's) design:^[1]

• The warhead separated from the rocket prior to atmospheric reentry, eliminating the hull strength problem, one of the V-2/R-1's biggest weaknesses.
• The propellant tank became the main load-bearing structure for the rocket, in contrast to the R-1's load-bearing hull. This reduced the overall weight of the spaceframe.
• The control module was moved from above the propellant tank to below the LOx tank. This made pre-launch preparations easier. As the control module was now placed directly over the engine, vibrations were reduced by using steel instead of aluminum for the tailcone.
• Radio guidance was introduced to improve accuracy, giving the R-2 accuracy comparable to the R-1, in spite of its doubled range.

The first test flight of the R-2 took place in September 1949, and it was accepted for service in November, 1951, actually entering service in large numbers around 1953. A grand total of 1,545 R-1 and R-2 missiles were produced.

The R-2 missile was the last Soviet missile based on German designs. While some German influences would clearly remain, Soviet missiles after the R-2 would be based on original designs by the OKB-1 group.

References

1. ^ (Russian) First Steps of the Domestic Rocket Construction

External links

• R-2